Other products

We manufacture all kinds of non-standard and standard metal and wood products according to your needs.

1. Kennel frames: the height of the existing frames in the warehouse is 164 cm. Frames with galvanised metal rods (16 mm in diameter) are 1 m, 1.5 m, 2 m, and 3 m in width. Frames with gates and a feeder are 1.5 m, 2 m, and 3 m in width. Frames with wood (fully grooved) are 1 m, 1.5 m, and 2 m in width. The frames are joined with screws. We can make frames of non-standard sizes. All metal is hot-dip galvanised.
2. Roof props (galvanised) are necessary for fixating roof joists. These roof props are designed so as to enable adjustment of the roof height. Roof prop is fitted (inserted) into the frame of the kennel.
3. “Legs” to raise the floor are made (stamped) of metal and are hot-dip galvanised. The "leg" shape is made so that the floor frame would be placed on it, then fixed with screws. With these "legs" the floor is raised 10 cm above the ground.
4. Car trunk lid retainer is designed to allow the pet in the car to get air from the environment when the car lid is opened after the car makes a stop at a parking lot. This way the car will not overheat, and strangers will not be able to get inside.
5. Short wheel base roof rack is designed for VW Transporter, Caravelle, Multivan T5 models (from year 2004). We started to manufacture them for cases where it is necessary to carry heavier loads on the roof rack. Since roof racks of other manufacturers can manage load up to 50-70 kg, we have manufactured roof racks that can manage up to 300 kg and more. However, it is risky to carry heavier loads due to the car roof structure and the risk of rollover. These racks are mounted on the roof using screws (using factory holes in the car roof). The racks are durable as they are made of metal pipes and are galvanised. These roof racks can be made for other car models as well.
6. Woodsheds are made from wood or metal frames. We usually build woodsheds by the back wall of the kennel. Other solutions are available as well.
7. Storage rooms are custom-made. Storage room can be made together with a kennel. We can build a separate kennel as well.
8. We make cages for dogs at home. We started to manufacture cages because of the fact that the cages sold in the shops are unstable, and their structure is weak. If the pet is stressed it is making every effort to escape. Our cages are made of metal pipes (25x25 mm and 16 mm), and then are hot-dip galvanised. Cages made in this way are very durable.

Do you have any questions? Contact us and we will be glad to answer them!